product information is current as of publication da te. the product conforms copyright ? 2006, pletronics inc. to specifications per the terms of the pletronics s tandard warranty. production processsing does not necessarily include testing of all parameters. SW11B series sine wave o scillators december 2006 ? pletronics SW11B series is a quartz crystal controlled precision sine wave signal source. ? fr4 base with a mechanical metal cover. ? low profile (2.9mm maximum) ? tape and reel or tube packaging is available. ? 10 to 700 mhz ? 14.0mm x 9.9mm package ? 5v operation ? excellent phase noise performance ? 50 ohm load with internal blocking capacitor pletronics inc. certifies this device is in accorda nce with the rohs 6/6 (2002/95/ec) and weee (2002/96/ec) directi ves. pletronics inc. guarantees the device does not cont ain the following: cadmium, hexavalent chromium, lead, mercury, pbbs, pbdes weight of the device: 1.33 grams moisture sensitivity level: 1 as defined in j-std -020c second level interconnect code: e4 absolute maximum ratings: parameter unit v cc supply voltage -0.5v to +7.0v vi input voltage -0.5v to v cc + 0.5v vo output voltage -0.5v to v cc + 0.5v thermal characteristics the maximum die or junction temperature is 155 o c the thermal resistance junction to board is 60 to 1 00 o c/watt depending on the solder pads, ground plane and construction of the pcb. www.datasheet.in
sw1 1b series sine wave oscillators december 2006 www.pletronics.com 425-776-1880 2 part number: sw11 45 by e - 230.0m - xx internal code or blank frequency in mhz optional enhanced otr e = temperature range -40 to 85 o c series model frequency stability 45 = +_ 50 ppm 44 = +_ 25 ppm 20 = +_ 20 ppm series model part marking: ple sw11 ff.fff m c cc c ymdxx or sw ywwxx ff.fff m c cc c p xxxxx legend: p or ple = pletronics ff.fff m = frequency in mhz yww or ymd = date of manufacture (year and week, or year, month and day) all other marking is internal factory codes specifications such as frequency stability, supply voltage and operating temperature range, etc. are not identified from the marking. external packa ging labels and packing list will correctly identify the ordered pletronics part number. codes for date code ymd code 6 7 8 9 0 1 2 year 2006 2007 2008 2009 2010 2011 2012 code a b c d e f g h j k l m month jan feb mar apr may jun jul aug sep oct nov dec code 1 2 3 4 5 6 7 8 9 a b c day 1 2 3 4 5 6 7 8 9 10 11 12 code d e f g h j k l m n p r day 13 14 15 16 17 18 19 20 21 22 23 24 code t u v w x y z day 25 26 27 28 29 30 31 electrical specification: for supply voltage v cc of 5.0v +_5%, over the specified temperature range www.datasheet.in
sw1 1b series sine wave oscillators december 2006 www.pletronics.com 425-776-1880 3 item min max unit condition frequency range 10 700 mhz frequency accuracy -- -- ppm determined by part number and inclusive for power supply, temperature and load harmonic output -- --15 dbc spurious output -- -50 dbc of v cc (see load circuit) output level -7.0 -4.0 dbm load of 50 ohms aging year 1 subsequent -5.0 +5.0 ppm at 25 o c -2.0 +2.0 ppm phase noise 10 hz offset 100 hz 1 khz 10 khz 100 khz 1 mhz 10 mhz -- -- -- -- -- -- -- -59 -87 -118 -147 -150 -152 -152 dbc/hz example at 200mhz current i cc - 90 ma pin 1 low, device disabled start up time - 10 ms time for output to reach specifie d frequency operating temperature range 0 +70 o c standard temperature range -40 +85 o c extended temperature range e option storage temperature range -55 +125 o c load circuit (50 ohm nominal load and no capacitance) www.datasheet.in
sw1 1b series sine wave oscillators december 2006 www.pletronics.com 425-776-1880 4 mechanical inches mm fr4 pcb base: solder masked all via holes tented on bottom copper clad ? oz. typical gold plated 0.02 linch (0.5 lm) label: white kapton with black letters Cor-- blue epoxy heat cure covering top with laser marked lettering cover: centered on the base 304 stainless steel 0.010 inch (0.25lm) electroless nickel plated 1 linch (25 lm) typical pin 2 ground plane is typical not to scale a 0.390 +_0.010 9.90 +_0.25 b 0.550 +_0.010 13.97 +_0.25 c 0.115 max 2.92 max d 1 0.026 typ. 0.66 e 1 0.050 1.27 f 1 0.028 r 0.72 r g 1 0.180 4.57 h 1 0.200 5.08 i 1 0.050 1.27 j 1 0.015 0.38 k 1 0.380 9.65 pad function note 1 nc no connection 2 nc no connection 3 ground (gnd) 4 output 50 ohm load, internal dc blocking capacitor rated at 25v 5 nc no connection 6 supply voltage (v cc ) recommend connecting appropriate power supply bypas s capacitors as close as possible. www.datasheet.in
sw1 1b series sine wave oscillators december 2006 www.pletronics.com 425-776-1880 5 260c maximum 10 seconds maximum 215c10c approximately 50 seconds allowed rate of temperature change maximum 4c per second 120 to 160 seconds 100 150 200 250 temperature (c) 175c10c reflow cycle (typical for lead free processing) the part may be reflowed 2 times without degradatio n. tape and reel: available for quantities of 250 to 1 000 per reel constant dimensions table 1 tape size d0 d1 min e1 p0 p2 s1 min t max t1 max 8mm 1.5 +0.1 -0.0 1.0 1.75 +_0.1 4.0 +_0.1 2.0 +_0.05 0.6 0.6 0.1 12mm 1.5 16mm 1.5 2.0 +_0.1 24mm 1.5 variable dimensions table 2 tape size b1 max e2 min f p1 t2 max w max ao, bo & ko 24 mm 15.54 22.25 11.5 +_0.1 16.0 +_0.1 5.16 24.3 note 1 note 1: embossed cavity to conform to eia-481-b dimensions in mm not to scale reel dimensions a inches 7.0 10.0 13.0 mm 177.8 254.0 330.2 b inches 2.50 4.00 3.75 mm 63.5 101.6 95.3 tape width c mm 13.0 +0.5 / -0.2 d mm 16.4 +2.0 -0.0 16.4 +2.0 -0.0 16.4 +2.0 -0.0 16.0 mm --- --- 24.4 +2.0 -0.0 24.0 mm --- --- 32.4 +2.0 -0.0 32.0 reel dimensions may vary from the above www.datasheet.in
sw1 1b series sine wave oscillators december 2006 www.pletronics.com 425-776-1880 6 tape and reel labeling label is 1" x 2.6" (25.4mm x 66.7mm) label is 1" x 2.6" (25.4mm x 66.7mm) font is courier new font is arial bar code is 39-full ascii (part number will read sw11xxby-106.25m for example) layout and application information for optimum jitter performance, pletronics recommen ds: ? a ground plane under the device ? no large transient signals (both current and volta ge) should be routed under the device ? do not layout near a large magnetic field such as a high frequency switching power supply ? do not place near piezoelectric buzzers or mechani cal fans. reliability : environmental compliance parameter condition mechanical shock mil-std-883 method 2002, condit ion b vibration mil-std-883 method 2007, condition a solderability mil-std-883 method 2003 thermal shock mil-std-883 method 1011, condition a esd rating model minimum voltage conditions human body model 1500 mil-std-883 method 3115 charged device model 1000 jesd 22-c101 www.datasheet.in
sw1 1b series sine wave oscillators december 2006 www.pletronics.com 425-776-1880 7 important notice pletronics incorporated (ple) reserves the right to make corrections, improvements, modifications and other changes to this product at anytime. ple reser ves the right to discontinue any product or service without notice. customers are responsible for obtai ning the latest relevant information before placing orders and should verify that such information is c urrent and complete. all products are sold subject to ples terms and conditions of sale supplied at the time of order acknowledgment. ple warrants performance of this product to the spe cifications applicable at the time of sale in accor dance with ples limited warranty. testing and other qual ity control techniques are used to the extent ple deems necessary to support this warranty. except wh ere mandated by specific contractual documents, testing of all parameters of each product is not ne cessarily performed. ple assumes no liability for application assistance or customer product design. customers are responsible for their products and applications usi ng ple components. to minimize the risks associated with the customer products and applications, custom ers should provide adequate design and operating safeguards. ple products are not designed, intended, authorized or warranted to be suitable for use in life suppor t applications, devices or systems or other critical applications that may involve potential risks of de ath, personal injury or severe property or environmental damage. inclusion of ple products in such applications is understood to be fully at the risk of the customer. use of ple products in such applic ations requires the written approval of an appropriate ple officer. questions concerning potential risk applications should be directed to ple. ple does not warrant or represent that any license, either express or implied, is granted under any pl e patent right, copyright, artwork or other intellect ual property right relating to any combination, mac hine or process which ple product or services are used. inf ormation published by ple regarding third-party products or services does not constitute a license from ple to use such products or services or a warranty or endorsement thereof. use of such inform ation may require a license from a third party unde r the patents or other intellectual property of the t hird party, or a license from ple under the patents or other intellectual property of ple. reproduction of information in ple data sheets or w eb site is permissible only if the reproduction is without alteration and is accompanied by associated warranties, conditions, limitations and notices. reproduction of this information with alteration is an unfair and deceptive business practice. ple is not responsible or liable for such altered documents. resale of ple products or services with statements different from or beyond the parameters stated by ple for that product or service voids all express a nd implied warranties for the associated ple produc t or service and is an unfair or deceptive business prac tice. ple is not responsible for any such statement s. contacting pletronics inc. pletronics inc. tel: 425-776-1880 19013 36 th ave. west fax: 425-776-2760 lynnwood, wa 98036-5761 usa e-mail: ple-sales@pletronics.com url: www.pletronics.com copyright ? 2005, 2006, pletronics inc. www.datasheet.in
|
